Miscellaneous Projects: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
These are smaller projects that we have built for internal use and have chosen to open-source. | These are smaller projects that we have built for internal use and have chosen to open-source. | ||
====12V Lighting Controller==== | |||
'''Description:''' | |||
A 4-channel controller for anything that needs +12V switched at up to | A 4-channel controller for anything that needs +12V switched at up to | ||
3A per channel. Uses the "RBBB" arduino design for control, and an | 3A per channel. Uses the "RBBB" arduino design for control, and an | ||
| Line 24: | Line 23: | ||
and "WestFW" from Instructables for the Eagle Port: | and "WestFW" from Instructables for the Eagle Port: | ||
http://tinyurl.com/dfj4qc | http://tinyurl.com/dfj4qc | ||
Revision as of 11:00, 5 January 2013
Miscellaneous Projects
These are smaller projects that we have built for internal use and have chosen to open-source.
12V Lighting Controller
Description: A 4-channel controller for anything that needs +12V switched at up to 3A per channel. Uses the "RBBB" arduino design for control, and an LMD18400 4-channel high-side automotive switch from TI. All 4 channels are PWM and the there are 2 interrupt and 2 analog/digital inputs with protection circuitry. Use this for "common cathode" LED strips or other loads where +12V needs to be switched on the high side.
Two of the inputs are interrupt-driven and 2 have analog capability, so this could be used as a 1-door sub-controller for home automation using a port of the "Open Access Control" or as a converter/interface to another system.
Thanks to Modern Device (http://moderndevice.com/) for the original design and "WestFW" from Instructables for the Eagle Port: http://tinyurl.com/dfj4qc
Downloads
File:12v light control v100.zip
- Includes Eagle CAD Schematic and Board Files, BOM, instructions.
- Bill of Materials included as attributes in drawing
- PCB also available from [1]