Open Access 4.0: Difference between revisions

From ACCX Products Wiki
Jump to navigation Jump to search
Line 22: Line 22:
* [[EM4100 Reader pinouts]]
* [[EM4100 Reader pinouts]]


===Downloads===
===Software Downloads===
<B>Firmware</B>
<B>Firmware</B>
[[File:Open_Access_Control_v4_std_136.zip]]
[[File:Open_Access_Control_v4_std_136.zip]]
*Latest firmware (v1.36) for the Open Access v4 Hardware
*Latest firmware (v1.36) for the Open Access v4 Hardware
*Requires Arduino v1.0 or higher.
*Requires Arduino v1.0 or higher.
<B>Schematics and Docs</B>
[[File:Open_Access_v4_schematic.pdf‎]]
*Full set of schematics for the Open Access v4, in PDF format.
<B>Mounting Template</B>
*Mounting template for installing the Open Access v4
*Prints as actual size (approximately 4x6")
[[File:Drill_template_v4.png|thumb|left]]

Revision as of 11:23, 24 October 2013

Open Access Control v 4.0

Openaccess-rpi.JPG

This page contains documentation, installation tips and downloads for the all-new Open Access version 4. Open Access is a first-of-its-kind offering that brings enterprise security to the hobbyist, hacker and developer. The system is open-source and not encumbered by licensing, NDAs and other problems found with commercial hardware.

System Features

The Open Access Standand version 4 has an Arduino-compatible Atmega 328P on-board and support for powering and interfacing with the Raspberry Pi via it’s 26-pin header. Features include:

  • Atmega328P with support for 200 local users in eeprom. Arduino compatible w/USB and ICSP programming.
  • (2) Wiegand RFID reader ports with fused power, LED, and buzzer support
  • (4) Supervised alarm zones
  • (1) Unsupervised tamper zone
  • (4) 5A relay outputs
  • (2) 12V auxiliary power ports
  • Selectable USB output or direct-attach 3.3V UART to the Raspberry Pi
  • Real-time clock with battery backup (DS1307)
  • Serial i2c EEPROM (Atmel AT24)
  • Expansion header for CD or more inputs/outputs

Support and Documentation

Software Downloads

Firmware File:Open Access Control v4 std 136.zip

  • Latest firmware (v1.36) for the Open Access v4 Hardware
  • Requires Arduino v1.0 or higher.