Open Access 4.0: Difference between revisions

From ACCX Products Wiki
Jump to navigation Jump to search
(Created page with "==Open Access Control v 4.0== thumb This page contains documentation, installation tips and downloads for the all-new Open Access version 4. Open Ac...")
 
 
(23 intermediate revisions by the same user not shown)
Line 13: Line 13:
*(1) Unsupervised tamper zone
*(1) Unsupervised tamper zone
*(4) 5A relay outputs
*(4) 5A relay outputs
*(2) 12V auxilliary power ports
*(2) 12V auxiliary power ports
*Selectable USB output or direct-attach 3.3V UART to the Raspberry Pi
*Selectable USB output or direct-attach 3.3V UART to the Raspberry Pi
*Real-time clock with battery backup (DS1307)
*Real-time clock with battery backup (DS1307)
Line 19: Line 19:
*Expansion header for CD or more inputs/outputs
*Expansion header for CD or more inputs/outputs


===Support and Documentation===
<B>Quick Start Guide</B>
* [[Open Access Quick Start Guide]]
*[[Installing a Raspberry Pi Kit]]
<B>Jumpers and settings</B>
* [[Open Access v4 Jumpers]]
<B>Electrical Specifications</B>
* [[Open Access v4 Specs and Ratings]]
<B>Schematics and Design Info</B>
[[File:Open_Access_v4_schematic.pdf‎]]
*Full set of schematics for the Open Access v4, in PDF format.
<B>RFID Reader Documentation</B>
* [[EM4100 Reader pinouts]]
<BR>


===Downloads===
===Software Downloads===
[[File:Open_Access_Control_v4_std_136.zip]]
<B>Firmware</B>
*Latest firmware (v1.36) for the Open Access v4 Hardware
[[File:Open_Access_Control_v4_std_140.zip‎ ]]
*Requires Arduino v1.0 or higher.
*Latest firmware (v1.40) for the Open Access v4 Hardware
*Last build tested with Arduino 1.64


[[File:Drill_template_v4.png]]
===Mounting Template===
*Mounting template for installing the Open Access v4
*Mounting template for installing the Open Access v4
*Prints as actual size (approximately 4x6")
*Prints as actual size (approximately 4x6")
 
[[File:Drill_template_v4.png|thumb|left]]
[[File:Open_Access_v4_schematic.pdf‎]]
*Full set of schematics for the Open Access v4, in PDF format.

Latest revision as of 11:30, 18 December 2015

Open Access Control v 4.0

Openaccess-rpi.JPG

This page contains documentation, installation tips and downloads for the all-new Open Access version 4. Open Access is a first-of-its-kind offering that brings enterprise security to the hobbyist, hacker and developer. The system is open-source and not encumbered by licensing, NDAs and other problems found with commercial hardware.

System Features

The Open Access Standand version 4 has an Arduino-compatible Atmega 328P on-board and support for powering and interfacing with the Raspberry Pi via it’s 26-pin header. Features include:

  • Atmega328P with support for 200 local users in eeprom. Arduino compatible w/USB and ICSP programming.
  • (2) Wiegand RFID reader ports with fused power, LED, and buzzer support
  • (4) Supervised alarm zones
  • (1) Unsupervised tamper zone
  • (4) 5A relay outputs
  • (2) 12V auxiliary power ports
  • Selectable USB output or direct-attach 3.3V UART to the Raspberry Pi
  • Real-time clock with battery backup (DS1307)
  • Serial i2c EEPROM (Atmel AT24)
  • Expansion header for CD or more inputs/outputs

Support and Documentation

Quick Start Guide

Jumpers and settings

Electrical Specifications

Schematics and Design Info File:Open Access v4 schematic.pdf

  • Full set of schematics for the Open Access v4, in PDF format.

RFID Reader Documentation


Software Downloads

Firmware File:Open Access Control v4 std 140.zip

  • Latest firmware (v1.40) for the Open Access v4 Hardware
  • Last build tested with Arduino 1.64

Mounting Template

  • Mounting template for installing the Open Access v4
  • Prints as actual size (approximately 4x6")
Drill template v4.png