Detailed Specification: Difference between revisions
Jump to navigation
Jump to search
Line 17: | Line 17: | ||
*Xbee Shield, on-board USB | *Xbee Shield, on-board USB | ||
**Pins 0,1 | **Pins 0,1 | ||
*[http://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino/ USB Host Shield] from Circuits @ Home | |||
**Pins 9,10 (Default Configuration) | |||
**Solder traces can be cut and spliced for other configurations. |
Revision as of 12:18, 31 October 2011
Detailed Specifications
Pin Reservations
- Ethernet Shield (W5100)
- SPI Pins (Communicates through the ICSP header)
- 11,12,13 SPI Bus(Uno/Other Atmega 328 boards)
- Pin 10 SPI Select (All boards)
- Pin 50,51,52 SPI Bus (Mega only)
- Pin 53 (Reserved - Mega only)
- SPI Pins (Communicates through the ICSP header)
- Ethernet shield SD card slot
- Pin 4 SPI Select (All boards)
- Seeed Studio SD Card Shield
- Pin 9,10,11,12,13 (Uno)
- Xbee Shield, on-board USB
- Pins 0,1
- USB Host Shield from Circuits @ Home
- Pins 9,10 (Default Configuration)
- Solder traces can be cut and spliced for other configurations.